you have 0 items in your cart
X10 Home Automation KR15A BIG RED Security Emergency Panic Button

X10 Home Automation KR15A BIG RED Security Emergency Panic Button


Rating: No Reviews. Be the first to write one!
Availability: Out of stock


  • X10 Powerhouse brand BIG RED Security System Emergency Panic Button model number KR15A.
  • Set's off your X10 alarm system in an emergency even if it isn't armed.
  • Self stick tape mounts to virtually any clean flat surface.
  • Can also be used as a wireless doorbell to sound a remote chime module. Would also require a security system base receiver or a transceiver module.
  • 2 AAA batteries are included.
  • RF transmission range up to 100' range.
  • You can view the instructions online in PDF format by clicking here.

This is the BIG RED emergency panic button model number KR15A for use with the Monitor Plus (DC7800), the Voice Dialer Protector Plus (DS7000), the SS5400, and the SS5402 security systems. These will also work with the Monitored Personal Protection (PA9200) and the Voice Dialer Personal Protection (PA5800) systems. These are initialized into any of the above mentioned security systems just like you would any security remote (SH624, KR10A). Just place the security console in INSTALL mode and press the BIG RED button until the console chimes indicating that it will now recognize it. You can install as many remote control types (KR10A keychain, SH624 handheld remote and/or KR15A panic buttons) as needed for a total of up to 8.

The BIG RED's serve as a "panic" button for members of your family all over the home. Simply place BIG REDs in the kids rooms, family room, den, basement, shed, garage, anyplace you want instant access to your security system. In an emergency, push the BIG RED button, holding it down for 4 seconds. It sends an RF (radio frequency) signal to the main security console, triggering the alarm, flashing the lights, sounding the siren, and calls ORCA's monitoring station for emergency help (if you have a Monitored system). It does this even if the security system isn't armed. The BIG RED's are wireless, battery operated, and mountable to almost any surface either with double sided tape or screws.

It can also be used to turn on a light or appliance. When you first press the button, it sends an X10 signal to turn on a light or appliance to any house or unit code you set. You could set it to turn on the light in the room it is located so the lights will come on before the alarm sounds. It could actually be used as a wireless switch, however it can not turn the light or appliance off since it does not send OFF commands. Can be used in this way with a standard X10 (non-security) transceiver model numbers RR501 or PAT01. Does not work with the TM751 transceiver even though the instructions says it does. We have tested these and they do not.

Compatible with all manufacturer's X10 products including those from but not limited to GE, IBM, HomeLink, Leviton, Magnavox, RCA, Radio Shack, Safety First, Smarthome, Stanley, X10, and X-10 PRO.

Class of X10 home automation device:
Security Remote

Product Reviews

There have been no reviews written for this product. Be the first to write a review!