X10 PRO 240 Volt 20 Amp Inline Relay Fixture Module XPFM2

All Categories > Appliance Modules

Brand new with One Year Warranty

X10 PRO brand Single Pole Single Throw (SPST) Inline relay fixture module model number XPFM2 for use in your home automation system.

The XPFM2 inline relay fixture module has massive power handling--roughly about 4800 watts. Rated at 240 Volts AC, 20 Amps, 60 Hz.

The XPFM2 inline relay fixture module features automatic gain control (AGC) for better reliability when used in electrically noisy environments.

Non-dimming. Use with loads that can't or shouldn't be dimmed.

The XPFM2 inline relay fixture module does not have local control--meaning that you can only operate the device they are controlling via X10.

Uses a mechanical relay for switching so there's no heat build-up as there would normally be with a solid state switch.

The XPFM2 inline relay fixture module behaves much like an appliance module does. If it's ON when the power is cut or fails, it remains ON once the power is restored.

Responds to X10 ON, OFF, ALL LIGHTS ON, and ALL OFF commands.

Measures in inches (L x W x D) 3 x 2 x 1.25. Same dimensions as the standard XPFM inline module.

The XPFM2 inline relay fixture module is UL Listed and CSA Approved.

You can view the instructions online for the XPFM2 in JPEG format by clicking here for page 1 and here for page 2.

This is the X10 PRO brand inline fixture module XPFM2 for use inside of recessed lighting fixtures or wall boxes. Works with X10 home automation remotes and controllers. These are a step above the regular XPFM inline module. These work on 240 volts AC and have a higher 20 amp rating. We managed to purchase their remaining quantity of them that they found when moving one of their warehouses. I guess you could say "they made us an offer we couldn't refuse."

These home automation modules have long been discontinued by X10 and are no longer being made. These are new, and unused, but old X10 stock (has a manufactured date of 1998) by the date code (8F24) on them. Typically X10 PRO items are warranteed for 2 years, but because of the age of these home automation modules, we are offering a 1 year warranty.

Three Wire Connectivity:

Black: AC Hot Phase 1
White: AC Hot Phase 2
Blue: Load

Compatible with all manufacturer's X10 products including those from but not limited to GE, IBM, HomeLink, Leviton, Magnavox, RCA, Radio Shack, Safety First, Smarthome, Stanley, X10, and X-10 PRO.

Class of X10 home automation device:
Receiver