you have 0 items in your cart
X10 PRO PSC01 Burglar Alarm Powerflash Home Automation Module PF284

X10 PRO PSC01 Burglar Alarm Powerflash Home Automation Module PF284

$24.99

Rating:
Average 5.0 from 1 reviews)
Quantity:
Availability: Out Of Stock

Discontinued by X10
Item is No Longer Available

  • Brand new with Two Year Warranty.
  • X10 PRO brand Powerflash burglar alarm interface module model number PSC01.
  • The PSC01 Powerflash Interface module can link virtually any security system with X10 modules.
  • A simple plug in device. Sends signals over your existing AC house wiring to control X10 lamp, wall switch, and appliance modules.
  • The PSC01 Powerflash Interface module is activated by either a low input voltage (mode A) of between 6 to 18 volts (AC, DC, or audio) or a dry contact closure (mode B).
  • Three modes of operation for the PSC01 Powerflash Interface. In modes 1 and 2, the lights remain on after the alarm resets to indicate there was a problem and so you don't have to enter a dark house.
    1. Turns on all lights and a selected appliance module that you have set by the house and unit codes on the front of the unit. When the alarm resets, the lights remain on and the appliance module turns off.
    2. Flashes all lights on and off. This will also activate any of the X10 security system Powerhorn sirens SH10A or PH508. Now you can add X10 remote Powerhorns to a non X10 security system.
    3. Turns on a selected lamp, wall switch, or appliance module (that you have set by the house and unit codes on the front of the unit) when the alarm is tripped and turns it off when the alarm resets.
  • Local TEST and ALL UNITS OFF buttons right on the module to test operation.
  • Measurement in inches: (L W D) 3.5 x 2.25 x 1.5
  • Comparable to the X10 Powerhouse brand model number PF284.
  • The PSC01 Powerflash Interface module is rated for 120 volts AC, 2 watts. UL listed.
  • Color is white.
  • You can view the instructions for the PSC01 Powerflash Interface module online in PDF format by clicking here.

This is the X10 PRO Powerflash Burglar Alarm interface module model number PSC01. Can be used to connect the output of any non X10 burglar alarm to flash house lights when the alarm is tripped. You can use your existing security system that doesn't have X10 capability to flash the lights in your X10 system.

Aside from the obvious use of being used with a security system to control X10 modules, there are many other uses for the PSC01 Powerflash Interface. Here's two examples: You could use it to turn on a light in the house letting you know that the garage door is open. You can use it with a float switch to turn on the sump pump in the basement when the water lever gets too high or have it sound an X10 siren or flash the lights so you will know the water level is rising. Additional components, sensors, switches, etc. may be needed to adapt the Powerflash interface to your particular application.

Compatible with all manufacturer's X10 home automation products including those from but not limited to GE, IBM, HomeLink, Leviton, Magnavox, RCA, Radio Shack, Safety First, Smarthome, Stanley, X10, and X-10 PRO.

Class of X10 home automation device:
X10 Controller/Burglar Alarm Interface Module 

Product Reviews

Showing reviews 1 - 1 of 1

  1. To Catch a Thief

    Posted by anonymous 6 months ago

    1. Used as garage door indicator. 2. Water meter reader comes by once a month. Trips Powerflash at gate leaving x10 module light on. I now know when he read the meter, and can lock the gate the rest of the month to secure property. 3. A friend caught teens jumping on and damaging bathroom sink by using magnets under sink , and tripped Powerflash module to alert him at the register when the light module went off. Busted !

Showing reviews 1 - 1 of 1